800.253.0820
3977 Emerald Dr., Kalamazoo, MI 49001
Quick-Change 2-Jaw Power Chucks
Untitled Document

Constant Grip High Speed Thru-Hole Power Chucks

Jaw Presetting Fixture Order number 1009-07090 for use with 6", 8", 10", 12", 15", 18" and 20" sizes Standard Bore and King Bore Models Quick Change Jaw Power Chucks.

  • One Year Warranty
  • ±.0005" Repeatability
  • 4-Point Adjusting Feature in the chuck body allows you to true up to virtually zero. Increase Soft Jaw Life by using the adjustment feature instead of skim cutting soft jaws as often. 6 points on 15" chucks and larger
  • High RPM ... up to 6,000 using standard top jaws ... without loss of gripping force, due to internally counter-balanced design.
  • Quick Change Master Jaws, 2 sets supplied with each chuck permits offline pre-assembly of top tooling for next job reducing traditional setup time by 95%.
  • SAFE Visual Indicator shows when Master Jaws are in the unlocked mode.
  • Master jaws available in 1.5mm x 60° (Japanese type), 1/16" x 90°, Acme serration and square serration, American Standard tongue and groove.
  • Utilize existing top tooling by selecting style of master jaws from 1.5 x 60,1/16" x 90, Am. Std. Acme, Am. Std Tongue & Groove and Square Serrations or substitute mono block jaws. Sets can be mixed styles.
  • Large Thru-Hole Capacity
  • Utilize the machine’s existing actuating cylinder - including Japanese types.
  • Easy Installation - removable blank sleeve in the chuck allows the customer to bore and thread the sleeve of the chuck to match existing drawtube of drawbar. PBA can supply chuck sleeve pre-threaded on request, at a nominal charge.
  • Optional Jaw Setting Fixture for presetting top jaws off the machine for the next job, while the machine is still running. A real timesaver!
  • Sizes 6", 8", 10", and 12", diameters...other sizes available on request.

See complete product details in our latest catalog >>

Table Test

Chuck
Size
Mount
(D)Direct (I)Indirect
RPM Model No.* Jaw
Stroke
Sleeve
Stroke
Thru
Hole
Collet Pad
Bar Capacity
Tooling
Hole Si"e
Operating
Force lbs/f
Grip
Force lbs/f
Wt
(lbs)
6.5" A2-4(I) 6000 9141-217__ .140" .630" 1.65" 1.5" 5/16" UNC 2,400 6,600 31
6.5" A2-5(D) 6000 9141-317__ .140" .630" 1.65" 1.5" 5/16" UNC 2,400 6,600 31
6.5" A2-6(I) 6000 9141-417__ .140" .630" 1.65" 1.5" 5/16" UNC 2,400 6,600 31
8.25"A2-5(I)55009141-321__.140".630"2.05"2.0"5/16" UNC4,10010,00053
8.25"A2-6(D)55009141-421__.140".630"2.05"2.0"5/16" UNC4,10010,00053
8.25"A2-8(I)55009141-521__.140".630"2.05"2.0"5/16" UNC4,10010,00053
10.0" A2-6(I) 5000 9141-426__ .160" .730" 2.56" 2.5" 3/8" UNC 4,800 13,200 82
10.0" A2-8(D) 5000 9141-526__ .160" .730" 2.56" 2.5" 3/8" UNC 4,800 13,200 82
12.0"A2-8(I)42009141-531__.160".730"3.54"3.0"3/8" UNC6,60018,000150
12.0"A2-11(D)42009141-631__.160".730"3.54"3.0"3/8" UNC6,60018,000150
* Insert last two digits for Master Jaw type...Example 9141-21723...Indicates 1.5mm x 60°: Master Jaw Required
Use 23 for 1.5mm x 60° Japanese type.
Use 26 for Acme Serration.
Use 10 for 1/16 X 90° Serrations.
Use 07 for Am. Std Tongue & Groove.
Use 27 for Square Serration.

Table Test

Dimensional and Performance Data (in inch)
  E
Chuck SizeABCDFMaxMin
6-A46.54.6854.8033.250.7872.1261.339
6-A56.54.8424.964.1250.7872.1261.339
6-A66.55.0785.1965.250.7872.1261.339
8-A58.255.1195.2754.12512.6371.733
8-A68.255.3545.515.2512.6371.733
8-A88.255.7055.8626.7512.6371.733
10-A6105.5115.6695.251.1813.2682.087
10-A8105.9056.0636.751.1813.2682.087
12-A8126.6146.7716.751.1814.2912.362
12-A11126.6146.7719.251.1814.2912.362
Dimensional and Performance Data (in inch)
  L  
Chuck Size G H J K Min Max S W
6-A4 M10x25(6) M10x25 5⁄16 UNFx1⁄2 2.99 0.94 1.57 0.475 1.22
6-A5 M10x130(4) M10x25 5⁄16 UNFx1⁄2 2.99 1.1 1.73 0.475 1.22
6-A6 M12x30(6) M10x25 5⁄16 UNFx1⁄2 2.99 1.5 2.13 0.475 1.22
8-A5 M10x30(6) M12x35 3⁄8 UNFx3⁄4 3.94 0.98 1.61 0.551 1.57
8-A6 M12x130(4) M12x35 3⁄8 UNFx3⁄4 3.94 1.19 1.81 0.551 1.57
8-A8 M16x30(6) M12x35 3⁄8 UNFx3⁄4 3.94 2.02 2.65 0.551 1.57
10-A6 M12x35(6) M12x35 1⁄2 UNFx3⁄4 4.53 1.02 1.75 0.63 1.57
10-A8 M16x150(4) M12x35 1⁄2 UNFx3⁄4 4.53 1.44 2.15 0.63 1.57
12-A8 M16x40(6) M14x45 1⁄2 UNFx3⁄4 5.71 1.3 2.03 0.71 1.81
12-A11 M16x160(4) M14x45 1⁄2 UNFx3⁄4 5.71 1.3 2.03 0.71 1.81
(T) Draw Tube Thread Blank
1. Dimensions listed are with 1.5 x 60° Japanese type master jaws. Some dimensions will vary using other Master Jaw types such as Acme, 1/16" x 90° or Am. Std. Tongue & Groove.
2. Chuck is at mid stroke with master jaws flush with the body O.D.
3. UNC mounting bolts available upon request.
Mono block jaws are extremely accurate solid one piece design ideal for dedicated jobs, and will allow you to work closer to the chuck face, due to no jaw bolt obstructions. For longer service Mono Block Jaws are made from a nitride hardening material to allow hardening after forming without major distortion.
See our product catalog for dimensions.
Extra Sets of Master Jaws for Quick Change Jaw Power Chucks
  6" 8" 10" 12"
Master Jaw Type - 15mm x 60°Fine Serration (Japanese Type) 8140-17623 8140-21623 8140-26623 8140-31623
1/16 x 90° Fine serration (European Type)8140-176108140-216108140-266108140-31610
Acme Serration N/A 8140-21626 8140-26626 8140-31626
American Std. Tongue & Groove8140-176078140-216078140-266078140-31607
Square Serration N/A 8140-21627 8140-26627 8140-31627
Mono Block Jaw***8130-17601P8130-216018130-266018130-31601
*** Also available in longer pointed design